The Samsung Washer Drain Pump can be replaced easily using the following steps: 1) Remove the bottom panel and disconnect the drain hose. 2) Disconnect the filter housing and clean it.
3) Remove the faulty drain pump and fit the new one. 4) Reattach the filter housing and reassemble the washing machine. Replacement drain pumps for Samsung washers are available on various online platforms like Amazon, eBay, and Walmart at different price ranges.
If you have a Samsung washer and are experiencing issues with the drain pump, there’s no need to worry. Replacing the drain pump is a simple process that you can do yourself. We will provide you with a step-by-step guide on how to replace the drain pump on a Samsung washer. We will also provide you with information on where you can purchase replacement drain pumps for your Samsung washer, with different price ranges. By following our guide, you’ll have your Samsung washer working perfectly again in no time.
Credit: zestplan.com
Replacing The Drain Pump
Easily replace the drain pump on your Samsung washer with these step-by-step instructions. Keep your washer running smoothly with a new drain pump.
Is your Samsung washer not draining properly? One possible cause could be a faulty drain pump. Replacing the drain pump is a relatively simple repair that you can do yourself, saving you time and money. In this guide, we’ll walk you through the step-by-step process of replacing the drain pump on your Samsung washer.
Tools Needed For The Repair
Before you start the repair, make sure you have the necessary tools on hand. Here’s a list of tools you’ll need:
- Phillips screwdriver
- Pliers
- Adjustable wrench
- Bucket or container
Checking The Drain Pump Filter
The first step in replacing the drain pump is to check the drain pump filter. This filter can often get clogged with debris, causing drainage issues. To check the filter, follow these steps:
- Locate the drain pump filter. It is usually located at the front or bottom of the washing machine.
- Use a screwdriver or pliers to remove the cover of the drain pump filter.
- Check the filter for any debris or blockages. If you find any, remove them and clean the filter thoroughly.
- Once the filter is clean, replace the cover.
Emptying The Emergency Drain Hose
In case the washer is filled with water, you’ll need to empty the emergency drain hose before proceeding. Here’s how you can do it:
- Locate the emergency drain hose, which is usually located at the bottom of the washer.
- Place a bucket or container underneath the hose to catch any water that comes out.
- Remove the plug from the emergency drain hose, allowing the water to drain into the bucket or container.
- Once all the water has drained out, replace the plug securely.
Removing The Bottom Panel
Now it’s time to remove the bottom panel of the washer. This will give you access to the drain pump for replacement. Follow these steps:
- Locate the screws on the bottom panel of the washer.
- Use a screwdriver to remove the screws and set them aside.
- Remove the bottom panel by pulling it towards you.
Disconnecting The Drain Hose
With the bottom panel removed, you can now disconnect the drain hose. This will allow you to remove the faulty drain pump and replace it with a new one. Follow these steps:
- Locate the drain hose connected to the drain pump.
- Using pliers, loosen the clamp securing the drain hose to the pump.
- Pull the drain hose off the pump.
Types Of Drain Pump
Before you proceed to remove the faulty drain pump, it’s important to know that there are two different types of drain pumps used in Samsung washers. The type of drain pump your washer has will determine the steps you need to follow for removal. Refer to your washer’s manual or identify the type of drain pump you have before continuing with the repair.
Disconnecting The Filter Housing
In addition to disconnecting the drain hose, you’ll also need to disconnect the filter housing to remove the faulty drain pump. Follow these steps:
- Locate the filter housing connected to the drain pump.
- Use pliers to loosen the clamp securing the filter housing to the pump.
- Disconnect the filter housing from the pump.
Cleaning The Filter Housing
While you have the filter housing disconnected, it’s a good idea to clean it to ensure optimal performance. Here’s how:
- Remove any debris or blockages from the filter housing.
- Rinse the filter housing with water to remove any remaining dirt.
- Allow the filter housing to dry completely before reattaching it to the new drain pump.
Removing The Faulty Drain Pump
Now that the drain hose and filter housing are disconnected, you can proceed to remove the faulty drain pump. Follow these steps:
- Locate the screws securing the drain pump in place.
- Use a screwdriver to remove the screws and set them aside.
- Gently pull the drain pump out of its housing.
Fitting The New Drain Pump
With the faulty drain pump removed, it’s time to fit the new drain pump into the housing. Follow these steps:
- Insert the new drain pump into the housing, making sure it fits securely.
- Use the screws you removed earlier to secure the new drain pump in place.
Refitting The Filter Housing
Now that the new drain pump is in place, you can reattach the filter housing. Follow these steps:
- Connect the filter housing to the new drain pump.
- Use pliers to secure the clamp, ensuring a tight connection.
Putting The Washing Machine Back Together
With the new drain pump and filter housing in place, it’s time to put the washing machine back together. Follow these steps:
- Reattach the drain hose to the new drain pump.
- Use pliers to secure the clamp on the drain hose.
- Replace the bottom panel of the washer by aligning it with the slots and sliding it into place.
- Secure the bottom panel by reinstalling the screws.
That’s it! You’ve successfully replaced the drain pump on your Samsung washer. Now you can enjoy a properly functioning washing machine without any drainage issues.
Credit: www.thespruce.com
Troubleshooting A Drain Pump
The drain pump is an essential component of your Samsung washer. It helps remove the water from the drum during the draining process. Like any other part, the drain pump can sometimes experience issues that hinder its performance. In this section, we will discuss how to troubleshoot a drain pump and identify common problems that may arise.
How To Know If The Drain Pump Is Bad
If you suspect that your Samsung washer’s drain pump is malfunctioning, there are a few signs to look out for:
- Excessive noise: If the drain pump is making unusual noises during the draining cycle, it could be a sign of a faulty pump.
- Failure to drain: If the water remains in the drum after the draining process, the drain pump may be unable to perform its function.
- Leaking water: A faulty drain pump can cause water to leak from the washing machine.
- Burning smell: If you notice a burning smell coming from the washer, it could indicate a motor issue with the drain pump.
Testing The Drain Pump Motor
Before assuming that the drain pump is the problem, it’s important to test the motor to ensure it is functioning correctly. Here is a step-by-step guide:
- Disconnect the washer from the power source to prevent any accidents.
- Locate the drain pump, usually located at the bottom of the washer.
- Remove any obstructions around the drain pump that may affect its operation.
- Use a multimeter to test the continuity of the motor. Set the multimeter to the resistance mode (Ω) and touch the probes to the terminals of the motor.
- If the multimeter displays a reading of zero or close to zero, the motor is functioning correctly. However, if there is no continuity or an inconsistent reading, the drain pump motor may need to be replaced.
Cleaning The Drain Pump
Regular maintenance and cleaning of the drain pump can help prevent clogging and improve its overall performance. Here’s how you can clean the drain pump:
- Disconnect the washer from the power source.
- Locate the drain pump, usually at the bottom of the washer.
- Remove any debris or foreign objects that may have accumulated around the pump.
- Inspect the pump impeller for any signs of damage or blockages. Use a soft brush or cloth to clean it.
- Reassemble the drain pump and ensure it is securely attached.
- Finally, reconnect the washer to the power source.
By following these troubleshooting steps, you can identify and resolve common issues with the drain pump in your Samsung washer. Remember, if you’re unsure or uncomfortable performing these tasks, it’s always best to seek professional assistance.
Credit: www.amazon.com
Frequently Asked Questions Of Samsung Washer Drain Pump
How Do I Know If My Washing Machine Drain Pump Is Bad?
To determine if your washing machine drain pump is bad, check for the following signs: – The water is not draining from the machine – There is excessive noise coming from the pump – The pump is leaking water – The pump is not working even after cleaning or unclogging it.
If you notice any of these signs, it is likely that your washing machine drain pump is bad and needs to be replaced. Consider consulting a professional for further assistance.
How Do I Clean My Samsung Drain Pump?
To clean your Samsung drain pump, follow these steps: 1. Check the drain pump filter. 2. Empty the emergency drain hose. 3. Remove the bottom panel and disconnect the drain hose. 4. Clean the filter housing. 5. Remove the faulty drain pump and replace it with a new one.
Can Drain Pump On Washer Get Clogged?
Yes, the drain pump on a washer can get clogged. It is important to regularly clean the drain pump filter to prevent clogs and ensure proper drainage.
How Do You Unblock A Washing Machine Drain Pump?
To unblock a washing machine drain pump, follow these steps: 1. Check the drain pump filter and clean it if necessary. 2. Empty the emergency drain hose. 3. Remove the bottom panel and disconnect the drain hose. 4. Clean the filter housing.
5. Remove the faulty drain pump and replace it with a new one.
Conclusion
Replacing the drain pump on a Samsung washer is a fairly simple process that can be done with a few basic tools. By following the step-by-step instructions provided in this blog post, you can easily remove the faulty drain pump and install a new one.
Remember to always consult your washing machine’s manual for specific instructions and safety precautions. Don’t let a malfunctioning drain pump disrupt your laundry routine – fix it yourself and save money in the process.